|
Above:
the twin tail variant InView unmanned aircraft for use in scientific,
commercial and state applications.
|
Comparison of Remotely Piloted Aircraft features
|
|
|
VuFab
|
InView BASIC
|
InView
|
|
engine(s)
|
1x SAITO FG-20
20 cc gasoline
|
2x SAITO FG-30
2x 30 cc gasoline
|
2x SAITO FG-30
2x 30 cc gasoline
|
|
camera(s)
|
Canon G10
|
Canon G10
|
Canon G10
Canon EOS 5D Mk II DSLR
|
|
Manual RC flight mode
|
YES
|
YES
|
YES
|
|
Autopilot flight mode
|
NO
Flight training
|
NO
Flight training
|
YES
BML autopilot
|
|
Weight
|
6.5 kg
without fuel
|
19.5
kg
without fuel
|
19.5 kg
without fuel
|
return to top
|
The InView Unmanned Aircraft System
|
The InView twin engine Unmanned Aircraft has impressive safety features,
together with a 700 km range. It is large enough to carry professional sensors, but small enough to be easily
transported in a small van.
The design focus has been on safety, flight automation and modularity.
The InView can be assembled and tested within one hour by two people. It can take-off from, and land on, a grass field.
A modular design with an open architecture
-
the reliable InView unmanned aircraft can fly on one engine;
-
the InView can be transported in the back of a small van, and then assembled and
tested by two people within an hour;
-
by mounting the engines on the wings, the aircraft can fly very slowly and the
engine induced vibration level is reduced, resulting in superior quality
photographs.
The safety provided by two engines is a requirement of several mineral
exploration companies, for Unmanned Aircraft operation Beyond Line of Sight.
return to top
|
The VuFab Unmanned Aircraft System
|
Above: the VuFab single engine aircraft with a payload bay that can house a
midsize camera, such as the Canon G-10. The large Payload Bay under the high
wing can be used to house an experimental payload.
See
VuFab
for more on the InView twin engine Unmanned Aircraft.
VuFab specifications
|
SPECIFICATIONS
|
|
Wingspan
|
2.438 m
|
94 in
|
|
Wing Area
|
8,581 cm
2
|
1,330 sq in
|
|
Weight
|
6.5
kg
|
13.0 lb
|
|
Wing Loading
|
7.575 kg / m
2
|
22.5
oz / sq ft
|
|
Length
|
1,625 mm
|
64 in
|
|
Engine
|
20 cc four stroke SAITO FG-20
runs on a 20 : 1 petrol (gasoline) : oil mixture.
|
|
Transmitter used in manual flight control
|
Futaba T10CAP transmitter operating at 2.4 GHz.
Support for 10 channels and PCM 1024.
|
The VuFab single engine Unmanned Aircraft is intended for use in aerial
photography and in Unmanned Aircraft Systems Research and Development work.
Above: The 2m wingspan VuFab Unmanned Aircraft ready to fly.
return to top
|
The WaveMaker microwave circuit layout software
|
WaveMaker LAYOUT
will enable you to create the layout of:
-
single and multi-layer printed circuit board metallisation patterns
-
semiconductor devices, such as laser and photodiodes
-
integrated optics elements
-
GaAs and Si monolithic microwave integrated circuits
return to top
|
